Aux Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices; Bluetooth Device - Silvercrest SBMS D30 B1 Bedienungs- Und Sicherheitshinweise

˜ AUX operation
Ensure that the product is connected to the
audio device .
Press SOURCE 7 or AUX 21 to select
AUX mode .
Operate your audio device directly for
playback features .
Press VOL +/– 2 / 43 to adjust the
volume to your desired level .
˜ Bluetooth operation
You can listen to music from a Bluetooth-enabled
device via this product .
˜ Pair Bluetooth-enabled
devices
The operational range between this product
and a Bluetooth device is approximately
8 metres (without any object between the
Bluetooth device and the product) .
Before you connect a Bluetooth device to
this product, ensure you know the device's
capabilities .
Compatibility with all Bluetooth devices is
not guaranteed .
Any obstacle between this product and a
Bluetooth device can reduce the operational
range .
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically .
Press SOURCE 7 or BT 21 to select
(Bluetooth) mode . NO BT will show on the
display if the product is not paired to any

Bluetooth device .

Activate your Bluetooth device and select the
search mode . SBMS D30 B1 will appear
on your Bluetooth device . If you cannot find
the product, press PAIR 34 or press and
hold 15 . The product enters pairing
mode . The display shows PAIRING .
Select SBMS D30 B1 in the pairing list .
After successful pairing: The display shows
BT .
Play music from the connected device .
To disconnect the Bluetooth function,
you can:
Switch to another function on the product;
Disable the function from your Bluetooth
device . The Bluetooth device will be
disconnected from the product .
Press and hold
The Bluetooth device will be disconnected
from the product .
NOTES:
Enter 0000 for the password if necessary .
If a connection exist, press PAIR 34 or press
and hold
mode . The connection will be interrupted .
The display shows PAIRING .
If no other Bluetooth device pairs with
the product within 2 minutes, the product
recovers its previous connection .
The product also disconnects when your
device is moved beyond the operational
range .
If you want to reconnect your device to
the product, place it within the operational
range .
If the device is moved beyond the
operational range, when it is brought back,
check if the device is still connected to the
product .
If they are connected, BT is shown on the
display .
If the connection is lost, the display shows
BT
NO BT . Follow the instructions of this
chapter to pair your device to the product
again .
˜ Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the product .
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the product's
remote control to play music stored on the device .
Pair your device with the product .
Play music via your device (if it supports
A2DP) .
15 or PAIR 34 .
15 to re-activate the pairing
GB/IE 35