SAT AE2021 Bedienungsanleitung Seite 49

中文
AE2021 EN DE RU KO PT JA ES
5.6 After the tire stops, slowly turn the tire by hand until all
unbalance indicators are on.
5.7 At this point, add 100 g of lead inside the tire at the position
of 12 O 'clock, and press [START] to start the motor for the third
time.
5.8 Note: The 12 O 'clock position for adding the lead shall be
accurate. It seriously affects the correctness of the unbalance
position. After the tire stops, if [CAL] [End] is displayed, the
calibration is completed. If [Err] [-*-] is displayed, it means
calibration in progress.
49