Chapter I Safety Precautions - SAT AE2021 Bedienungsanleitung

Chapter I Safety Precautions

- Incorrect operation may cause personal injury and equipment damage.
- Please read carefully and understand all the contents of the instructions before use.
- Please ensure that children and other unauthorized personnel stay away from the work area.
- Ensure that the equipment is connected to the correct power and air source, and is reliably grounded.
- Please use this equipment on a flat, level, dry and reliable bearing plane.
- Avoid accidental startup. Please ensure that the equipment is turned off and the electrical source is disconnected before maintenance.
- Keep the protection device and safety device in the correct position and keep working normally.
- Keep the work area clean and well lit. Chaos or dark areas may cause accidents.
- It is strictly prohibited to overload this product, otherwise the resulting accident liability will not be covered by the insurance.
- Please keep away from heat and fire source. High temperature may cause damage to this equipment and sealing elements.
- Avoid dangerous environment. Do not use equipment in humid environment or expose it to rain.
- It is strictly prohibited for any untrained personnel to use this equipment, and it is not allowed to disassemble or refit this equipment
voluntarily.
- Ensure that the wheels are installed correctly, and correct way is selected according to different wheel hubs to lock and fix them on the
equipment.
- Check carefully before each use. If there is oil leakage, loosen or damaged parts and accessories, they cannot be used.
- Please let professionals with professional maintenance qualifications maintain the equipment reasonably. If accessory replacement is
required, please use original accessory.
- Safety shoes, safety goggles and working gloves conforming to relevant national safety regulations must be worn during operation, and
related Sata products are recommended.
- It is strictly prohibited to use the equipment after drinking, mental fatigue, inattention, drowsiness and any unconsciousness caused by
drugs.
- Before balancing, the tire and rim shall be checked for potential defects; it is prohibited to balance any defective tire and rim.
- The tire weight shall not exceed the bearing capacity of the balancing machine as overweight of the wheel may damage the balancing
machine permanently; the balancing machine shall not be used for tires larger than design dimensions.
Warning
The notices, warnings, instructions and other information contained in the instructions cannot cover all possible
situations. Operators must understand that daily prudent operation and professional knowledge are indispensable
factors in operating this product.
AE2021
中文
EN DE RU KO PT JA ES
35