Operation; Automatic Station Scan; Manual Station Scan & Fine Tuning; Station Memory - Imperial DABMAN 100 Bedienungsanleitung

9 . OPERATION

9.1 Operation

9.1.1 Automatic station scan

To perform a station scan proceed as follows:
› While in FM mode, press the
start with the highest FM frequency (108 MHz) and will run backward. The
scan will stop automatically at the first FM station received.
E
› Press the SCAN
until you receive the desired FM station.
9.1.2 Manual station scan and fine tuning
You can also scan for stations manually. Proceed as follows:
› While in FM mode, scan for stations using the
scan the bandwidth downward, use the
cies upward.
› To do this, keep the
and will stop as soon as a radio station is received.
› Briefly press the
ved. Press the appropriate key to move
0.05 MHz

9.1.3 Station memory

In FM mode the IMPERIAL DABMAN 100 features a favourites memory for
10 radio stations. To save a station, you must first perform a station scan as
described under 8.1.1 resp. 8.1.2.
› Now press down the
to save the station, for approx. 2 seconds, the display will show the mes-
sage that the station has been saved under the favourites slot selected.
› If stations have been stored in the favourites memory, you can call these up
by pressing the
Operating Manual
SCAN
key again to continue the scan. Continue tin this manner
◄ key resp. the
◄► keys to additionally fine-tune the stations being recei-
numeric key (1 - 10, see Fig. 4.1), on which you wish
appropriate numeric
key (see Fig. 4.1). The FM scan will
◄► keys. Use the
► key to scan the available frequen-
► key pressed down, the scan will begin
up (►) or down (◄)
key.
60
◄ key to
in stages of