Manual Settings; Drc - Dynamic Range Control - Imperial DABMAN 100 Bedienungsanleitung

7 . DAB
› While in DAB mode press the
radio). You will be taken to the DAB menu. Use the
the item "Complete scan".
› To confirm press the
gress bar will appear on the display. As soon as the scan is completed, the
radio will begin playing the most recently selected station. The favorites
memory list will not be affected by the station scan.

7.2.2 Manual settings

Here you have the option of calling up the individual DAB channels (5A - 13F)
sorted by frequency, and of seeing their signal quality. In digital radio, stations
are not transmitted directly via frequencies (unlike the case with FM recep-
tion), instead the reception range is divided into channels, which in turn will
transmit a specific package of stations via a single fixed frequency (e.g. for
Rhineland-Palatinate Channel 5C, frequency 178,352 MHz, all stations of
German public radio as well as private radio stations).
While in DAB mode press the
radio), you will be taken to the DAB menu.
› Use the ◄► keys to navigate to the item "Manual settings".
› To confirm press the
› Use the ◄► keys to navigate through the DAB channels. Use the
key to select the channel for which you would like to see the information
(signal strength etc.), then press the
› Leave the menu by repeatedly pressing the

7.2.3 DRC - Dynamic Range Control

The DRC dynamic range control will reduce the difference in volume between
the loudest and the least loud signal of a transmission – in practice this means
that quiet tones will be reproduced relatively more loudly, and loud notes will
be played relatively less loud. Switch the DRC on or off in accordance with your
listening preferences, as follows:
MENU key (on the remote control or on the
ENTER key, the station scan will begin, and a pro-
MENU key (on the remote control or on the
ENTER key, You will be taken to the channel overview.
ENTER
57
◄► keys to navigate to
key to confirm your selection.
BACK key.
IMPERIAL DABMAN 100
®
E
ENTER