Balluff BIS U-6028-048-104-06-ST28 Betriebsanleitung Seite 77

BIS U-6028-048-1_4-06-ST28
Processor unit
8
Function of the device (continued)
3rd example
Read the TID of the data carrier
For configuration with 16 byte buffer size!
If the TID length configured in the UHF manager is shorter
than 12 bytes, leading zeros are used to pad the TID to
12 bytes.
Command from controller
1. Process output buffer
(note sequence):
01 Command designator 05
hex
00 /0F Set AV bit
hex hex
3. Process input buffer:
01...0C Copy TID
hex
Process output buffer:
00 /0F Reset AV bit
hex hex
www.balluff.com
2.
00
hex hex
01...0C
00
hex
4.
01...0F
BIS U-6028 reaction
Process input buffer
(note sequence):
/0F Set AA bit
hex
Enter TID
hex
/0F Set AE bit
hex
Process input buffer:
Reset AA and AE bits
hex
english 33