Balluff BIS U-6028-048-104-06-ST28 Betriebsanleitung Seite 69

BIS U-6028-048-1_4-06-ST28
Processor unit
8
Function of the device (continued)
Command designator B2
hex
value to individual data carrier (USER data)
Sub- Meaning
address
00 1st bit
hex
string
01 Command B2
hex hex
recognition (USER data).
02 Start Start address (Low Byte) from
hex
address 1 which writing is to start.
(Low Byte)
03 Start Start address (Middle Byte) from
hex
address 2 which writing is to start.
(Middle
Byte)
04 Start Start address (High Byte) from
hex
address 3 which writing is to start.
(High Byte)
05 Number of The number of bytes that are to
hex
bytes 1 be written starting from the start
(Low Byte) address (Low Byte).
06 Number of The number of bytes that are to
hex
bytes 2 be written starting from the start
(Middle address (Middle Byte).
Byte)
07 Number of The number of bytes that are to
hex
bytes 3 be written starting from the start
(High Byte) address (High Byte).
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
Data is accepted from the processor unit only after the
command has been accepted by the processor unit and
acknowledged.
00 1st bit
hex
string
01 Data Value that is to be written to the
hex
data carrier.
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
www.balluff.com
or 32 : Write constant
hex
Functional description
: Write to data carrier
Command designator 45
hex
Sub- Meaning
address
00 1st bit
hex
string
01 Command 45
hex hex
recognition
02 Antenna Antenna power for the current
hex
power antenna (head) in increments of
0.25 dBm
Permitted value range (decimal):
BIS U-6028-048-104-... :
68 (+17.00 dBm ERP)...132
(+33.00 dBm ERP)
BIS U-6028-048-114-...:
77 (+19.25 dBm EIRP)...144
(+36.00 dBm EIRP)
The set power is not
permanently saved and is reset
to the saved default value when
the reader is booted.
The port power on the device is
calculated and set based on the
configured antenna/cable
parameters.
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
: Set antenna power
Functional description
: Set antenna power
english 25