Keeping Warm - Beem Teatime Bedienungsanleitung

EN

Keeping Warm

If the water in the kettle (3) is to be kept at a certain temperature for a prolonged period, the
keep-warm function can be switched on. This is particularly advisable if tea is being prepared in the
kettle.
The device switches off the heating element once the water has reached the set temperature and
switches it back on again as soon as the temperature of the water drops.
1. Prepare the device (see the "Preparation" chapter).
2. Press the On / Off button (9) . The control lamp in the button lights up, the device starts
the heating process. In addition, the control lamp lights up for the temperature level which was
chosen last.
3. Press the button with the temperature you want (see the "Operation" chapter | "Temperature
Buttons"). The control lamp in the corresponding button lights up.
4. Press the keep-warm button (14). The control lamp in the button pulses.
After the end of the heating process, you will hear two short beeps. The control lamps (
On / Off button,
continue pulsing. The water is reheated as soon as it starts to cool down. As soon as the
thermostat switches the heating back on, the control lamp for the selected temperature
button lights up again.
The kettle (3) can be removed from the base station (4) and placed back on it at any time.
The keep-warm function remains switched on.
5. If the keep-warm function is to be switched off, press the
is heard and all three control lamps go out.
The keep-warm function switches off automatically after 30 minutes.
Use with Tea Strainer
To make tea directly in the Teatime kettle, you also require our matching BEEM Teatimer Tea Strainer
with lid. It can be obtained from selected specialist stockists, directly via our website www.beem.de or
from our customer service department on request.
1. Unscrew the tea strainer from the tea strainer holder (note the marking on the tea strainer).
2. Fill the tea strainer with tea (see "Tips For Making Tea" chapter).
3. Screw the tea strainer onto the tea strainer holder (note the marking on the tea strainer) until
it engages.
4. Pull the tea strainer upwards with the aid of the knob (Picture B) and turn it to the right. This
will keep it above the water line.
5. Follow the instructions for making tea depending on the tea used (see the "Tips For Making
Tea" chapter).
6. To immerse the tea strainer in the water, turn the knob to the left and allow the tea strainer
to dip into the boiling water.
keep-warm button, selected temperature button) will light up or
keep-warm button. A long beep
28