Printing The Status Page - Dascom Tally T5040 Kurzanleitung

Quick start guide

Printing the Status Page

PAPER
USER1 STOP USER2
SETUP /EJECT
Print StatusPage
Load Paper
Print StatusPage
Printing...
Print StatusPage
Completed
The printer has a function that allows you to printout the current parameter
settings.
PAPER
USER1 STOP USER2
/EJECT
SETUP
PAPER
USER1 USER2
STOP
/EJECT
SETUP
PAPER
USER1 USER2
STOP
/EJECT
SETUP
Power the printer off.
Press and hold the USER2 key while switching on the
printer.
The LCD displays Print StatusPage Load Paper. Release
the USER2 key.
Insert the paper in the printer. The LCD displays Print
StatusPage Printing... and the printout of the status page is
carried out.
The paper will be ejected once printing is complete.
While printing, you can use the STOP key to cancel the
printing. If STOP key is pressed, printing stops and paper
will be ejected.
When the test printout is aborted or completed, LCD will dis-
play Print StatusPage Completed.
The Print setting mode will be ended automatically and a
Power ON reset will be performed.
Service and Maintenance
19