Specifications - WIKA 632.50 Serie Betriebsanleitung

3. Specifications

3. Specifications
Pressure limitation
Steady:
Fluctuating:
Short time:
Temperature effect
When the temperature of the measuring system deviates from the refer-
ence temperature (+20 °C): max. ±0.6 %/10 K of full scale value
Case ingress protection
IP54, IP65
The materials used can be found in the instrument marking. See chapter
2.5 „Labelling / Safety marks".
For further specifications see WIKA data sheet PM 06.03 and the order
documentation.
1) For general use, no ATEX requirement
Operating instructions capsule pressure gauge, model 63x.50 per ATEX
Full scale value
0.9 x full scale value
1.3 x full scale value
(per IEC/EN 60529)
1)
EN
17