GCE MediVital E Bedienungsanleitung Seite 9

Deep sleep mode – low consumption of electrical energy
Activate the E-GAUGE by turning the flow head knob into any position for normal operation
The indicated gas pressure in the cylinder depends on the ambient temperature. The function
of the E-GAUGE can be influenced by this feature, especially when there is a significant
variation in the ambient temperature.
The remaining time shown on the display is 5-10% shorter (in relation to the temperature,
cylinder size) than the real time in which the actual cylinder content would be emptied at a
constant flow. This fact provides the patient with a sufficient security reserve time.
If the Medivital®E has not been in use for an extended
period (10 - 20 hours typically) and actual pressure in
cylinder is more than 15 bar at the same time.
If the Medivital®E has not been in use for an extended
period (10 - 20 hours typically) and actual pressure in
cylinder is less than 15 bar at the same time.
If zero pressure is indicated, the pre-set volume of the
cylinder is also displayed.
If the symbol ??L is visible (instead of a numeric value). The
parameter cylinder volume is not set and it is necessary to
configure it using the mobile application, see chapter 6.1.3
This functionality is intended primarily for filling stations
9/108
EN