GCE MediVital E Bedienungsanleitung Seite 15

Selection of the searching method for the E-GAUGE
Search using a 2D code reader
2D code scanning
Connection to the loaded E-GAUGE
There are two ways to search and pair the required
E-GAUGE –
A.
Using a 2D code reader it is possible to connect with the
specific E-GAUGE if the 2D code is displayed
B.
Use the "Nearby searching" key to search for E-GAUGEs
that are within the reach of a device with the mobile
application installed
A.
Key for activation of 2D code reader from the E-GAUGE
display
B.
Field for displaying the network MAC address of the
electronics that was loaded using the 2D code reader
C.
Key for returning to the previous screen
A.
Key for switching on/off the backlight LEDs
B.
2D code reader window. Focus the window on the display
of the E-GAUGE with the code displayed. If the code is
difficult to read for the reader, the ambient light conditions
have to be improved.
After having the 2D code scanned, the application returns
automatically to the previous screen
A.
Display the MAC address of the loaded E-GAUGE
B.
Press the "Connect key" to establish the connection
between the GCE E-GAUGE mobile application and the
E-GAUGE. The connection can be delayed, the key name
changes to "Connecting" while waiting. Upon successful
connection the window "E-GAUGE paired" displays
automatically
C.
"Back" key returns to the previous screen
15/108
EN