5.1.2. VISUAL AND ACOUSTIC WARNINGS
Warning alarms are divided into two groups:
5.1.2.1. Operational alarms - related to the general use of the device. These are marked with a
warning triangle in the top part of the display.
Low pressure - first warning
EN
Low pressure - second warning
If the "Low pressure" alarm is shown, the remaining gas in the cylinder can be consumed
very quickly. Pay close attention to the cylinder, prepare a reserve gas supply, and possibly
discontinue the cylinder from service immediately.
Indication of the simultaneous use of a quick coupler and hose connection
•
In case the cylinder pressure drops under 50 bar.
•
The display background becomes black.
•
The warning symbol is indicated
•
The acoustic signal starts simultaneously with the flashing
red LED diodes located on the left of the display.
•
In case the cylinder pressure drops under 15 bar.
•
Information about the remaining time is exchanged by the
actual cylinder gas pressure value.
•
The acoustic warning signal starts simultaneously with
the flashing the red LED diodes located on the left of the
display.
•
When
the
E-GAUGE
consumption (about 4 l/min higher) than corresponding to
the flow outlet consumption only.
•
Only the pressure parameter is displayed
•
The warning symbol of QC (quick coupler) is indicated
•
If the QC outlet flow is too low, this status may not be
detected.
•
After the cylinder had been re-filled, the use of QC
quick coupling may be temporarily indicated during the
subsequent cooling down process.
10/108
detects
significantly
higher