GCE MediVital E Bedienungsanleitung Seite 16

Selection of an E-GAUGE from the list
EN
E-GAUGE paired
Reading the current operating values
A.
A list of E-GAUGEs is located within the reach of the mobile
application. Each row represents one found E-GAUGE. The
devices are identified by the serial number of the valve and
the network (MAC) address of the electronics. The selected
device is highlighted in red.
B.
To connect the GCE eGauge application to an E-GAUGE,
press the "Connect" key. The connection is delayed, during
the idle period the key name changes to "Connecting".
Upon successful connection the window "E-GAUGE paired"
displays automatically.
C.
"Back" key returns to the previous window.
A.
If the E-GAUGE is correctly paired with the mobile
application, the following valve parameters will be
displayed on the status bar:
SN: serial number of the valve
MAC: network address of the electronics
FW: current version of the firmware downloaded in the
E-GAUGE
B:
"Values reading" key to switch to the screen enabling the
reading of current manometer values
C:
"Customer parameters" key to switch to the device
parameterization screen (provided the user is logged in
using the PIN code)
D:
"Disconnect" key to terminate the communication
A.
Table of current operating values and warnings
B.
"Back" key to return to the previous screen
C.
"Historical Data" key to switch to the "History" screen
16/108