The Battery Must Be Replaced By The Manufacturer Or Its Service Agent In Order To - ECOVACS ROBOTICS WINBOT X Bedienungsanleitung

Important Safety Instructions
11. Do not use the Appliance if it does not firmly
attach to the glass or has visible signs of
damage.
12. To reduce the risk of electrical shock, do not
put the Appliance in water or any other liquid.
Do not place or store Appliance where it
could fall or be pulled into a bathtub or sink.
13. Do not touch the power plug or the Appliance
with wet hands.
14. Do not charge the Appliance in extremely
hot or cold environments, as doing so may
affect battery life span.
15. When charging the Appliance, do not place
it on top of other electrical appliances, and
keep it away from fire and liquid.
16. Take care not to damage the power cord.
Do not pull on or carry the Appliance by the
power cord, use the power cord as a handle,
or put heavy weights on the power cord.
Keep the power cord away from hot surfaces.
4
EN
17. Do not use with a damaged power cord or
receptacle. Do not use the Appliance if it is
not working properly, has been dropped,
damaged, or has come into contact with
water. It must be repaired by the manufacturer
or its service agent in order to avoid a hazard.
18. If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent in order to avoid a hazard.
19. The plug must be removed from the
receptacle before cleaning or maintaining
the Appliance.
20. Do not unplug the Power Adapter by pulling
on the power cord.
21. The Battery must be replaced by the
manufacturer or its service agent in order to
avoid a hazard.
22. The Battery must be removed and discarded
according to local laws and regulations
before disposal of the Appliance.
23. The Appliance must be disconnected from
the receptacle before removing the battery
for disposal of the Appliance.