ECOVACS ROBOTICS WINBOT X Bedienungsanleitung Seite 19

Cleaning the Driving Treads
Before cleaning, make sure the Power Switch is turned to "I" and the
Fan is off.
After cleaning the Driving Treads, attach the Cleaning Pad and start
cleaning the window, or switch the Power Switch on WINBOT to "O"
to power WINBOT OFF.
Inspect the Driving Treads by using the Direction Control Buttons on
the Remote Control. Stop the Driving Treads if you see dirt, and clean
them with the finishing cloth.
3. Maintenance
19
EN