ECOVACS ROBOTICS WINBOT X Bedienungsanleitung Seite 12

2. Operating WINBOT
2. Operating WINBOT / 2.2 Notes Before Cleaning
Power ON WINBOT
1
Turn the power switch at the bottom of WINBOT to "I". ("I"= ON,
"O"= OFF)
Connect Safety Pod
3
When using WINBOT, Safety Pod MUST be used to fasten WINBOT
for security.
Insert the Safety Pod Connector into the WINBOT Safety Pod Port,
press, and turn it clockwise until it locks into place.
* Safety Pod comes with batteries pre-installed.
12
EN
Power ON Safety Pod
2