Music Control - Cameo LED MINI PAR CAN Bedienungsanleitung

OPERATION:

MUSIC CONTROL

Press the MODE button repeatedly until "SU00" appears in the display.
Now the light is controlled by the built-in microphone and follows the
beat of the music. Now press the ENTER button again and use the UP and
DOWN buttons to set the sensitivity of the microphone (0 - 99). Confirm
with ENTER.
SELECTINg DMX MODE
Press the MODE button repeatedly until one of the four modes appears
in the display (2Ch, 3Ch1, 3Ch2, 6Ch). Press ENTER and use the UP and
DOWN buttons to select the desired DMX mode. Confirm with ENTER.
SELECTINg THE DMX ADDRESS
Press the MODE button repeatedly until "A" and 3 additional characters
appear in the display. Press ENTER to use the UP and DOWN buttons to
select the desired DMX start address (A001 - A512). Confirm with ENTER.
Note: In order to be able to use the light in DMX mode, the DMX start
address mode must be set.
NOTE
Unless one of the 4 buttons is pressed, the LED display switches off
automatically after approx. 20 seconds. As soon as one of the four buttons
is pressed, the display switches on again.
REMARK
To attain a concentration of the light beam from 55° to 40°, insert the
included lens in the mount provided for this purpose.
10