Music Control; Internal Programs - Cameo LED Multi PAR Bedienungsanleitung

OPERAtiOn:

MuSiC COntROl

Press the MODE button repeatedly until "SOUND MODE"
appears in the display. Now the lighting system is cont-
rolled by the built-in microphone and follows the beat of
the music. Press the ENTER button. The cursor appears
in the "SENS:xx" field in the bottom line of the display.
Now you can use the UP and DOWN buttons to adjust the
microphone sensitivity (00 - 31), whereby "00" means
minimum sensitivity and "31" means maximum sensiti-
vity, then confirm with ENTER. Simultaneously, the cursor
jumps to the "P:xx" field. Here, you can now use the UP
and DOWN buttons to select one of 15 lighting programs
in music control mode. Confirm the input with ENTER.

intERnAl PROgRAMS

Press the MODE button repeatedly until one of the 18
internal programs appears in the display:
01.StAtiC
(static colours)
02.DREAM
(15 different colour with crossfades between one another. The effect speed is separately adjustable and a strobo-
scope effect can be activated additionally)
03.MEtEOR
(The four lights are activated and deactivated one after the other in specific sequences with varying colour and
intensity. The effect speed is separately adjustable and a stroboscope effect can be activated additionally)
04.FADE
(15 different colours that are faded in and out one after the other. The effect speed is separately adjustable and a
stroboscope effect can be activated additionally)
05.ChAngE
(15 different alternating colours. The effect speed is separately adjustable and a stroboscope effect can be
activated additionally)
06.-18.FlOW1-13
(All FLOW programs consist of various programmed colour change effects. The effect speed is separately adjus-
table and a stroboscope effect can be activated additionally)
10