Energetics POWER RUN 1060HRC Aufbauanleitung Seite 9

Maintenance Guide
ITEM DAILY (Before Use)
Machine Examine if the frame is
Itself stable for exercise. Adjust
balancer to make it stably
positioned on the ground.
Location Assure enough safe space
around the machine, and
make sure no dangerous
objects around.
Power Assure power cable is well-
Cable plugged and not pressed by
the machine.
Running Assure no objects on the
Belt belt, and run the machine
at 3~5 kph to see if the belt
drifts. Please refer to "
ALIGNING THE RUNNING
BELT" to adjust.
Running Check if running belt is
Belt slipping. Please refer to
Tension "ADJUSTING
Adjustment BELT TENSION" to adjust
it.
Lubrication
of Running
Belt
The Inside
of Motor
Cover
Safety Turn the power on and
Key remove safety key to check
if it is in normal function.
Lubrication Alert:
1. The word of 'LUBE' will flash in every 3 seconds on the console once accumulated running distance reaches 180KM (or
360, 540,...) to remind user to do the maintenance.
2. Press any button to jump out of the alert mode. Word of 'LUBE' will show up again whenever the machine re-starts if
the user doesn't eliminate the word by taking action of No. 3 as below.
3. Press " STOP' & "SPEED Slow (-)" buttons at the same time to eliminate the word of 'LUBE', but distance will keep
accumulating.
DAILY (After Use)
Use dry cloth to wipe
and clear sweat and
dust on the surface of
machine.
Use wet cloth to clean
the ground. Do not put
wax on the ground.
Turn off the power or
unplug power cable.
Use dry cloth to wipe
and clear the surface
of running belt.
RUNNING
Make sure safety key is
re-placed on
console.
WEEKLY MONTHLY
Use damp cloth to
clean. (Do not use
Solubility
Use water for plastic
parts. Use silicone oil
or wax for metal parts.
Vacuum dust at the Check if they are well-
bottom and around fixed and make sure no
the machine. breakdown
panel.
Check if all bolts are
firmly fastened and no
rusting.
Use dry cloth to Use
damp cloth to clean
(Do not use Solubility
Cleaners).
the
3 MONTHS
Cleaners.)
on the
Use JK's lubricant
silicone oil to
lubricate whenever
reaching 180km.
Please refer to
"RUNNING DECK
LUBRICATION".
6 MONTHS
Open motor cover
and vacuum all
dust.
9