Energetics POWER RUN 1060HRC Aufbauanleitung Seite 12

Warning:
Please note when inserting Cross Bar (5) into the
hole on Front Post (2), the cable inside Front Post
would not be compressed or cut off.
Step 4
Step 5
Step 6
Mount Handlebar (4) at the top of two Front Posts
(2), well connect the cable from right side of
Handlebar to the cable from right Front Post.
Use Bolt & Washer (E) to fix Handlebar
onto Front Posts.
Place Console (3) on the Handlebar (4) and use
screw (D) to fix console onto Handlebar.
12