What To Do If - Becker MC611 Montage- Und Betriebsanleitung

Problem
Transmitter cannot be programmed.
B-Tronic receiver can only be oper-
ated in Master mode.
Receiver can still be operated after
the factory settings have been re-
stored or the transmitter has been
deleted.
Run times deviate from those pro-
grammed.
Tubular drive does not run in a 24-
hour cycle.

What to do if...?

Insert a new battery.
Insert the battery correctly.
Reduce distance from receiver.
Set the function switch to the correct
position.
Ready the receiver for programming
again.
Reprogram the receiver.
Reprogram the transmitter and then
delete again.
Power failure at the drive. Repro-
gram switching times.
Set to " " using the function button.
Program run times.
Remedy
73 - en