Setting The Limit Positions Of B-Tronic Tubular Drives; Upper Stop To Lower Stop - Becker MC611 Montage- Und Betriebsanleitung

Setting the limit positions of B-Tronic tubular
drives

Upper stop to lower stop

Put the transmitter into master mode.
Select the tubular drive by pressing the
firms.
All the following settings will then only be executed for this device.
button until the tubular drive con-
Open to the permanent upper stop.
▻ The tubular drive switches off automat-
ically.
Then close to the permanent lower stop.
▻ The tubular drive switches off automat-
ically.
► The limit positions are now set.
59 - en