Programming More Transmitters - Becker MC611 Montage- Und Betriebsanleitung

Programming transmitter
Please make sure that only one receiver is in programming
mode at any time. It is not possible to program/clear multiple
receivers at the same time.
3s

Programming more transmitters

The receiver mode must always be set appropriately for the
receiver. Roller shutter is the factory setting.
Programming more B-Tronic transmitters in the B-
Tronic receiver
Put the receiver into programming mode.
Please make sure that only one receiver is in programming
mode at any time. It is not possible to program/clear multiple
receivers at the same time.
Press the programming button of the transmitter
for 3 seconds whilst in programming mode.
▻ The receiver confirms.
► Programming is now complete.
55 - en