Operating Modes - Steinbach Waterpower 5000 Bedienungsanleitung

Active display elements:
F
18
- The Temperature 2 display
- The Timer display
standby mode in hours, if the timer is activated (see the "Operation" section).

Operating modes

The heat pump has the following operating modes:
- Heating operating mode
- Cooling operating mode
Press the Mode button
operating modes. You can set the water temperature to a value between +5 °C and
+45 °C.
In heating operating mode, the heat pump heats the water to the set water temperature.
When the heating operating mode is activated, the default value for the set water
temperature is 40 °C.
In cooling operating mode, the heat pump cools the water to the set water temperature.
When cooling operating mode is activated, the default value for the set water
temperature is 30 °C.
56
21
22
shows the current water temperature.
21
shows the time remaining for the automatic activation of the
22
to switch the heat pump between the heating and cooling
17