Steinbach Waterpower 5000 Bedienungsanleitung Seite 46

- Do not use any objects apart from those permitted by the
manufacturer to speed up the defrosting process.
- Immediately shut off the heat pump if you suspect a coolant leak.
- The coolant is odourless. Always keep ignition sources away from
the installation site of the heat pump.
- Contact an authorised expert if you suspect a coolant leak.
- Observe the national regulations on gas.
- All persons involved in work on the refrigerant circuit must have a
valid certificate from an industry accredited certification body
that ensures competence in handling refrigerants according to a
specific assessment recognized by industry associations.
- Take precautions so that the device cannot be damaged while in
storage.
- Store the device in a well ventilated location.
- Store the device in a well ventilated location where the room size
corresponds to the room area specified for operation.
Risk of injury due to inadequate qualifications!
Lack of experience or skill in handling the required tools and lack of
knowledge of regional or normative regulations for the necessary
manual work can result in serious injuries or material damage.
- Engage a qualified specialist for all work for which you are unable
to assess the risks due to inadequate personal experience.
A faulty electrical installation or a mains voltage that is too high can
lead to electric shock.
- Have the installation, initial start-up and maintenance of the heat
pump carried out by authorised specialists only.
46
WARNING!
WARNING!
Risk of electric shock!