1
Safety Instructions
Please read and follow the safety instructions, provided in a
separate manual, carefully. Make sure that the environmental,
mounting, and installation prerequisites are met. This manual
should be kept at a safe place and in reach of the device.
1.1
Symbols
The exclamation mark warns about possible damage of
!
the device itself, to connected devices, and to the user.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2
General Safety Instructions
To prevent electric shock hazard or damage to the
equipment, disconnect the power cord to remove
!
power from the server. Portions of the power supply
and some internal circuit remain active until power is
removed.
Device components inside the system can reach high
temperatures. Do not open the system while in
!
operation. Repairs may only be carried out by
authorized, specially trained personnel. When in
doubt, contact OSRAM service.
Safety Instructions
9