Maintenance; Cleaning - OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung

Maintenance

10 Maintenance
Do not try to repair the device. Return it to your
!
OSRAM distributor for replacement or repair.
The red front panel of the device must be mounted in
operation (fire enclosure). Remove the red front panel
!
only when device is disconnected from mains.
Place no foreign objects inside the device when the
!
red front panel is removed.
Before dismounting, appropriate measures must be
!
taken to protect the respective components against
damage caused by electrostatic discharge (ESD
protection).
10.1

Cleaning

Only external cleaning might be necessary. This cleaning may only
be carried out by skilled personnel. To clean the device,
disconnect it from the line power supply. Disconnect all devices
connected to the server. Do not use any cleaning agents
containing solvents (e.g. acetone, alcohol, or thinner) or abrasives.
The housing surface can be cleaned with a moist, lint-free cloth.
Ensure that no water penetrates into the housing. Otherwise, this
could damage the electronics.
44