OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung Seite 43

Connected
Ethernet
devices are
not found
The fan
speed varies
Check correct
e:net bindings in
SYMPHOLIGHT /
LAS. Check
correct IP
settings in
Windows. Check
the Ethernet
cables for
proper fit. Check
the network
switch.
This is correct,
the fans are
controlled by the
system
temperature.
There are at least
two Ethernet
ports in the
LCE 3 (fx). Use
the correct one.
The IP address
must also be
defined in
Windows. The
plugs might not
be connected
properly. The
network switch
might not work
as specified.
Troubleshooting
Information
for Use
43