OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung Seite 23

Special instructions when using mains voltage or
other dangerous voltages:
!
— The housing is earthed via the power connector as
standard. When using mains voltage at the relay
interface, it is recommended to use an additional
ground wire and connect it to the earth connection
(6.3 mm blade terminal).
— Make sure that no pieces of wire get into the
housing of the LCE 3 (fx), such as when stripping
wires.
Relay plug
Provided plug
GFKC 2,5/3-ST-7,62
GMSTB 2,5/3-ST-7,62
only to use in
combination with cable
housing
KGG-MSTB 2,5/4
Max. Max. current
voltage for UL
250 V AC 10 A
250 V AC 10 A
Product Specifications
Condition
Comply with
safety
instructions
for usage of
AC mains.
No additional
safety
requirements
needed.
23