General Remarks; Transport; Unpacking; Support - OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung

4

General Remarks

4.1

Transport

Only transport the device in its original packaging. This protects
the server from damage.
4.2

Unpacking

Only unpack the device at its installation location. To protect the
device against condensation water, unpack it and wait until all
moisture remaining in the device has evaporated. Condensation
can occur when the device is moved from a cold to a warm
location. Keep the packaging for use in case of further transport.
Inspect all parts for completeness regarding chapter „2.2 Delivery
Content" on page 13. If there is apparent damage to the device
or parts are missing from the delivery scope, please contact the
OSRAM support service.
4.3

Support

In case of technical problems or questions regarding installation
and repair please contact:
OSRAM GmbH
Customer Service
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
General Remarks
27