Troubleshooting - OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung

9

Troubleshooting

Problem
System does
not power up
Dry contact
inputs do not
work
Check
Main switch on
the back panel
set to OFF?
Is the LCE 3 (fx)
I/O system
configured
correctly in the
Device Manager
in Programmer?
Is the LCE 3 (fx)
added and
online in the
Device Manager
of
SYMPHOLIGHT?
Reason
If the main
switch is set to
OFF, the front
button will not
work.
The LCE 3 (fx)
I/O driver must
be activated in
Programmer. The
LCE 3 (fx) must
be added in
SYMPHOLIGHT.
The Programmer
and
SYMPHOLIGHT
cannot use the
LCE 3 (fx) at the
same time; the
Programmer has
priority.
Troubleshooting
Details
Information
for Use
LAS System
Manual,
SYMPHO-
LIGHT
system
manual
41