Dismounting - OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung

Dismounting

11 Dismounting
Shut down the system and disconnect from main power.
Disconnect all attached cables. Dismount the e:cue LCE 3 (fx) from
the rack. The dismounting is completed.
Before dismounting, appropriate measures must be
!
taken to protect the respective components against
damage caused by electrostatic discharge (ESD
protection).
In case of returning the device
When returning the device for any reason, e.g. for exchange, be
sure to watch the following note:
Always care for proper backup of all user data like shows, images
and media files. Data backup is responsibility of the user, OSRAM
cannot guarantee that user data are kept.
46