OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung Seite 42

Troubleshooting
Relay
outputs do
not work
Temperature
warning on
display
42
Is the LCE 3 (fx)
I/O system
configured
correctly in the
Device Manager
in Programmer?
Is the LCE 3 (fx)
added and
online in the
Device Manager
of
SYMPHOLIGHT?
Insufficient air
flow or room
temperature too
high?
The LCE 3 (fx)
I/O driver must
be activated in
Programmer. The
LCE 3 (fx) must
be added in
SYMPHOLIGHT.
The Programmer
and
SYMPHOLIGHT
cannot use the
LCE 3 (fx) at the
same time; the
Programmer has
priority.
If the room
temperature
exceeds 40 °C,
the system will
overheat.
LAS System
Manual,
SYMPHO-
LIGHT
system
manual
Information
for Use