Lce 3 (Fx) System Display - OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung

LCE 3 (fx) system display

Notice that only the network settings for the LAS application have
been set now. If you have further network devices installed, each
of these devices have to be configured separately. For further
details on the LAS, see the System Manual e:cue LAS.
7 LCE 3 (fx) system display
After powering up the system, start the lighting control application
SYMPHOLIGHT or Lighting Application Suite. To start the
application automatically on powering up, configure the settings of
the application to start with Windows.
The system display usually cycles through various display pages.
You can select these pages with the up and down cursor keys
( ). In some pages additional subpages can be selected to view
more information with the right cursor key (
previous page use the left cursor key (
You can sent text to the system display via SYMPHOLIGHT and
Lighting Application Suite. For more details, see the respective
Information for Use.
* Programmer 7.0 *
- MASTER -
SystemName
* Programmer 7.0 *
AppUptime: 2d19h47m
SysUptime: 2d22h49m
ActHandels: 1/48
36
The LAS Programmer version.
Master or slave system.
The system name.
The LAS Programmer version.
Application uptime (days, hours, minutes).
System uptime (days, hours, minutes).
Number of running cuelists.
). To return to the
).