OSRAM e:cue Lighting Control Engine 3 Bedienungsanleitung Seite 11

The red front panel of the device must be mounted in
operation (fire enclosure). Remove the red front panel
!
only when device is disconnected from mains
To prevent the device from overheating, only operate
it in well-ventilated environment. Do not install next to
!
heat emitting sources or in a place subject to direct
sunlight. Let the device cool down after operation
before mounting or removing the device to avoid
burnings.
Installation and maintenance of this product must be
i
performed by qualified individuals who are
knowledgeable about the procedures, precautions,
and hazards associated with the product.
Seek professional assistance before using an adapter
i
or extension cord. These devices could interrupt the
grounding circuit.
i
If safety instructions are missing, please contact the
OSRAM support service to receive a new copy.
Safety Instructions
11