Cleaning And Maintenance; Troubleshooting - Concept LO7070 SINFONIA Bedienungsanleitung

EN

CLEANING AND MAINTENANCE

Before cleaning the unit, always disconnect the power cord from the wall outlet!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may
damage the unit's surface!
Wash the removable parts in warm water. Use the supplied brush.
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
1. Open the upper cover.
2. Release the juice drain cover upwards together with the rotating sieve.
3. Remove and clean the pulp container.
4. After you finish cleaning the removable parts, follow the reverse steps to reassemble

TROUBLESHOOTING

Problem
Motor does not run.
Motor is noisy.
48
Cause
Plug inserted into the mains
outlet incorrectly or insufficiently.
The mains outlet is not live.
Wrongly assembled upper cover
or closing clip.
Supply cable is damaged.
Incorrectly mounted rotating
sieve.
Clogged rotation sieve.
Solution
Check the plug connection.
Check for voltage, e.g. by connecting
another appliance.
Check assembly of the unit.
Refer the unit to an authorized service center
for testing and repair.
Check the assembly of the unit.
Disconnect the cable from the socket.
Release the upper lid, empty the pulp
container and clean the rotating sieve.
LO7070