Beko CEG7425B Bedienungsanleitung Seite 64

6 Cleaning and maintenance
27. Press the drip tray back onto
the appliance until it audibly
engages.
– The OK display lights up
permanently.
28. Then push OK (button 6).
– The following message is
displayed:
29. Remove the brewing unit and
clean it thoroughly from the
inside and from the outside
according to the instructions in
chapter 6.8.
– After 10 seconds, the missing
brewing unit is indicated by
the following message:
64 / 233 EN
30. Replace the brewing unit
by turning it into the right
position (the outlet tube facing
downwards and to the front),
insert the brewing unit into
the guide grooves and push
it completely into the coffee
machine.
31. Push the coffee grounds
container
appliance and push the outlet
unit into the upper position.
Close the door.
– The descaling program is
complete when the "Descaling
program" function display
goes out.
32. Remove the water tank (7) and
fill it with minimum 1 litre fresh
water. Replace the water tank.
– The coffee machine is now
ready for operation again and
returns to the last selected
coffee mode.
Fully Automatic Coffee Maker / User Manual
back into the