Beko CEG7425B Bedienungsanleitung Seite 58

6 Cleaning and maintenance
– The display "Cleaning program"
flashes in the display, while
the "Fill water tank" display is
permanently lit.
3. Remove the water tank (7) and
fill with min. 1 litre fresh water.
Insert the water tank again.
4. Open the lid of the coffee bean
container (14) and the coffee
powder shaft (10).
5. Put a cleaning tablet into the
coffee powder shaft.
6. Then press OK (button 6).
– The appliance will implement
several cleaning cycles. After
the cleaning phase is complete,
the OK display will light up
permanently.
58 / 233 EN
7. Remove and empty the drip tray.
8. Press the drip tray back onto
the appliance until it audibly
engages.
C
9. Then push OK (button 6).
– The appliance then initiates the
rinsing phase.
Fully Automatic Coffee Maker / User Manual
The drip tray serves
as collecting con-
tainer for the clean-
ing water. You can
alternatively place a
container (>350 ml)
under the outlet.