Milk Cleaning System After; Dispensing Drink With Milk - Beko CEG7425B Bedienungsanleitung

Operation and use
5
Remember that two
brewing
take place in sequence
C
in two cup mode. Only
remove the cups/
glasses when both
brewing
are finished.
• A "Cappuccino" is made in the
reverse sequence.
• You need to use coffee cups,
putting the coffee in first and
then filling the cups up with milk
froth.
5.15 Milk cleaning
system after
dispensing drink
with milk
After using milk, you should rinse
the milk system immediately.
1. Press button 2 repeatedly until
the "Milk system cleaning" display
isselected.
2
Fully Automatic Coffee Maker / User Manual
2. Press OK (button 6).
operations
C
operations
C
3. Fill a container with 200 ml water
4. Insert the milk tube down to the
The "Milk system
cleaning"
and the temperature
control lamp flash
while the heating
switches on briefly.
After
complete, the symbols
"Milk system cleaning"
and "Milk froth" flash
in the display.
and the appropriate quantity of
milk system cleaner (see notes
on the cleaning solution).
bottom of the container with the
cleaning solution.
symbol
heating is
41 / 233 EN