Midi Out Mode; Sys-Ex Dump - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Select the desired MIDI channel by pressing the respective FLASH button of PRESET A.
Press and hold the RECORD button.
Press the REC EXIT button.
The MIDI channel was memorized and you are in the normal mode again.

MIDI Out Mode

Press and hold the RECORD button.
Press the FLASH button 2 of PRESET A three times.
Release the RECORD button.
The display shows "CH-0" and the Scene Setter is in MIDI Out mode.
Select the desired MIDI channel by pressing the respective Flash button of PRESET A.
Press and hold the RECORD button.
Press the REC EXIT button.
The MIDI channel was memorized and you are in the normal mode again.

Sys-Ex Dump

With this function, you can transmit the memory content between two Scene Setters or to another Midi Sys-
Ex compatible sequencer or computer. Connect the Midi Out output of the sending unit to the Midi In input of
the receiving unit.
Please note: A received Sys-Ex Dump can delete all settings of a device. If you do not wish that a device
accidentally receives Sys-Ex data, switch it off or adjust another Midi channel.
When sending or receiving Sys-Ex dump, the device ID is 55H.
The different functions of the individual notes are as follows:
Note Velocity
22-69 Program Master
70-93 Channel dimmer
94
95
96
97
98
99
100
101
102
Receiving a Sys-Ex Dump
Press and hold the RECORD button.
Press the FLASH button 2 of PRESET A three times.
Release the RECORD button.
When the display shows "In", the controller is ready for receiving the dump.
When receiving the dump, all other functions are switched off. As soon as the transmission is complete or
cancelled due to errors, the controller returns to normal operation mode.
Sending a Sys-Ex Dump
Press and hold the RECORD button.
Press the FLASH button 4 of PRESET A three times.
Release the RECORD button.
When the display shows "Out", the controller is ready for sending the dump.
When sending the dump, all other functions are switched off. As soon as the transmission is complete or
cancelled due to errors, the controller returns to normal operation mode.
Function
Turn on/off program 1-48
Turn on/off channel 1-24
Full On
Dark
Hold
Turn Audio chase on/off
Chaser/Scenes
Double Preset Mode
Single Preset Mode
Change step
Blackout
27/28 00079614.DOCX, Version 1.7