Switching The Speed Range; Inverting The Chaser Direction; Deleting A Step In A Chaser; Adding A Step To A Chaser - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Switching the Speed Range

The speed range can be switched from 5 minutes to 10 minutes.
Press and hold the RECORD button.
Press FLASH button 10 of PRESET A three times.
Release the RECORD button.
The 10MIN LED lights up and the right scale is activated.
The speed range can be switched from 10 minutes to 5 minutes.
Press and hold the RECORD button.
Press the FLASH button 5 of PRESET A three times.
Release the RECORD button.
The 5MIN LED lights up and the left scale is activated.

Inverting the Chaser Direction

Press the CHASE REV button.
The chaser direction is inverted.

Deleting a Step in a Chaser

Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull all channel faders to minimum.
Push the MASTER A fader to maximum.
Hold the EDIT button and press the chaser's FLASH button of PRESET B.
The chaser will be called up.
Pull the SPEED fader to minimum.
Press the STEP button in order to call up the desired step.
Press the DELETE button in order to delete the step.
Press and hold the RECORD button and press the REC EXIT button in order to leave the editing mode.

Adding a Step to a Chaser

Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull all channel faders to minimum.
Push the MASTER A fader to maximum.
Hold the EDIT button and press the chaser's FLASH button of PRESET B.
The chaser will be called up.
Press the MODE SELECT button, until the 1-48 SINGLE/PRESET PARK lights up.
Push the MASTER A fader to maximum.
Push channel faders to the desired setting.
Press the RECORD button.
Push all channel faders to minimum.
Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull the SPEED fader to minimum.
Press the STEP button in order to insert the step at the desired position.
Press the INSERT button in order to add the step.
Press and hold the RECORD button and press the REC EXIT button in order to leave the editing mode.

Deleting a Scene/Chaser

Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Press and hold the RECORD button and press the desired FLASH button of PRESET B twice.
The scene/chaser is deleted.
25/28 00079614.DOCX, Version 1.7