Problem Chart; Cleaning And Maintenance; Technical Specifications - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

7. PROBLEM CHART

PROBLEM
No power.
Display shows LOP.
Cannot memorize Scene.
Cannot edit programs.
Programmed scene/chaser
disappeared.
Cannot display
scene/chaser.
No signal output.

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents! There are no serviceable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control channels:
DMX512 output:
Sound control:
Audio input:
Dimensions (LxWxH):
Weight:
Accessories:
EUROLITE EDX-4 DMX dimmer pack
EUROLITE DPX-1210 DMX 19" dimmer pack 70064140
EUROLITE DPX-610 DMX 19" dimmer pack
FUTURELIGHT DES-3 DMX-terminator 3-pin 51834001
Mixer case Pro "B", 27", sloping, black
EUROLITE Foot controller
Please note: Every information is subject to change without prior notice. 22.10.2013 ©
CAUSE
The power unit is not connected.
Operating volatage is too low.
RECORD button forgotten.
Program mode locked.
Selected wrong page.
Wrong fader setting.
Blackout mode activated.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
70064545 EUROLITE DMX Scene Setter 24/48
230 V AC, 50 Hz ~
via power unit included in the delivery (12 V DC, 500 mA)
8 W
48
3-pin XLR-connector with polarity selector
via built-in microphone or line input
0.1-1 V, RCA
710 x 264 x 90 mm
7.5 kg
No.
70064072
70064120
30111556
70064490
Check the connection cable of the
power unit and any extension cables.
Check the connection cable of the
power unit and any extension cables.
Press the RECORD button after
setting the channels.
Unlock program mode.
Select correct page via the Page
button.
Adjust Master fader to maximum, the
Fade fader and Speed fader to the
desired setting.
Switch off blackout by pressing the
Blackout button.
28/28
REMEDY
00079614.DOCX, Version 1.7