Deleting All Scenes/Chasers; Clearing Memory; Locking Program Mode; Single Chase/Mix Chase - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Deleting all Scenes/Chasers

Press and hold the RECORD button.
Press the FLASH buttons 1, 4, 2, 3 of PRESET A.
Release the RECORD button.
All scenes/chaser are deleted.

Clearing Memory

Press and hold the RECORD button.
Press the REC CLEAR button.
Memory is cleared.

Locking Program Mode

If you want to protect your programs from undesired access, you can lock the program mode.
Press and hold the RECORD button.
Press the REC EXIT button.
Release the RECORD button.
The red LED above the RECORD button is off.

Single Chase/Mix Chase

The button SINGLE CHASE/MIX CHASE changes the chaser play mode. In Single Chase mode, the
controller runs one Chaser. In Mix Chase mode, all Chasers selected will be run simultaneously.

Switching Off Individual DMX Channels

You can switch off an individual channel by pressing the BLIND button and the respective FLASH button.
In order to switch the channel on again, press the HOME button and the respective FLASH button.

Setting All Channels to Maximum

Press the FULL ON button and all channels will be set to their maximum value. As soon as you release the
button, the channels return to their original setting.

Blackout Mode

Press the BLACKOUT button and all devices will be set to blackout mode.

Kill Function

Via the kill function, you can set only the desired channels to 100 % in a running chaser. All other channels
remain off, the chaser keeps running internally.
Call up the desired chaser. Press the REC/EXIT button; the KILL LED lights up. Press the desired FLASH
button(s) of the desired channel(s).

MIDI In Mode

Press and hold the RECORD button.
Press the FLASH button 1 of PRESET A three times.
Release the RECORD button.
The display shows "CH-1" and the Scene Setter is in MIDI In mode.
26/28 00079614.DOCX, Version 1.7