Memorizing Chasers; Calling Up Chasers; Runnning A Chaser; Sound Control - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Memorizing Chasers

With the Scene Setter you can memorize up to 24 different scenes with 24 channels (Page 1 to Page 4).
Press the MODE SELECT button, until the 1-48 SINGLE/PRESET PARK LED lights up.
Push the fader MASTER A to maximum.
Push channel faders to the desired setting.
Press the RECORD button.
Push channel faders to the desired setting for editing the next scene and press the RECORD button.
Memorize as many scenes as desired or until the maximum (999 scenes) is reached.
Press and hold the RECORD button and press the desired FLASH button of PRESET B.
The scene is now memorized on this fader.

Calling Up Chasers

Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull all channel faders to minimum.
Push the MASTER A fader and the FADE TIME fader to maximum.
Push the channel fader of the desired chaser of PRESET B to maximum.
The chaser will be called up.

Runnning a Chaser

Adjust the desired fade time via the FADE fader.
Adjust the desired chaser speed via the SPEED fader.

Sound Control

If the chaser is to be run sound-controlled, press the AUDIO button and adjust the desired sensitivity via the
AUDIO fader.
If the chaser is to be run exactly in the bass beat, pull SPEED fader to minimum (the display shows "Sho")
and enter the bass beats by pressing the TAP SYNC button repeatedly.
If the chaser is to be run step by step, pull the SPEED fader to minimum (the display shows "Sho") and
press the STEP button repeatedly.

Memorizing/Editing Chaser Speed

With the Scene Setter, you can run several chasers at a time in the Mix Chase mode and define and
memorize an individual chaser speed for every chaser.
Press the AUDIO button, the LED turns off. Press the PARK button until the MIX MODE LED lights up.
Select the desired chaser via the faders of PRESET B. Adjust the desired speed via the SPEED fader or the
TAP SYNC buttons. Press and hold the REC SPEED button and press the respective FLASH button of
PRESET B in order to memorize the speed.

Deleting a Memorized Chaser Speed

Press the AUDIO button, the LED turns off. Press the PARK button until the MIX MODE LED lights up. Set
the SPEED fader to minimum position (Show). Press and hold the REC SPEED button and press the
respective FLASH button of PRESET B in order to delete the memorized speed.
24/28 00079614.DOCX, Version 1.7