Viscount Jubilate 230 Bedienungsanleitung Seite 22

viscount Jubilate 230-232-235-245
Once the second digit has been entered the channel number will be stored to memory and the Midi
register will stop flashing and return to the mode it was in before you started programming.
WARNING!!: To store a MIDI channel number to memory two digits must always be entered. If
you wish to enter channel 6 therefore, you will need to select the digits 0 and 6.
2. Automatic Pedal Registers, Voice Variation: By using the Automatic Pedal (A.P.) register,
the functions of the pedal board can be assigned to the 32 keys nearest the left of the first manual.
With the Voice variation register (A/B) you can change a style (baroc / romantic) of all the voices
selected.
3. Man.I section: The registers contained in this section can be used for the sound you want on the
first manual.
There is also a Tremulant tab to enable the Tremolo effect, a button (II/I) to turn on combination
of the second manual with those of the first and also the Midi key described at point 1 in this
chapter.
4. Man.II section: This section contains the tabs for Man.II. Through these tabs you can choose the
sounds for Man.II.
This section also contains the Tremulant tab to enable the Tremolo effect and the Midi tab de-
scribed on point 1.
JUBILATE 245
5. Midi section: Through these tabs it is possible to transmit datas of the sections: Man.I, Man.II
and Pedal. Transmission and reception of the codes of Program Change, Control Change and SysEx
are always activated. The programming procedure of the Midi channel is the same as the one described
for the models 230, 232 and 235 (see Pedal section of this chapter).
6. Couplers section: Through these tabs it is possible to coupler the tabs of the two manuals and of
the pedals. These tabs have following functions:
• Tabs I/P: the voices of Man.I play also on Pedal.
• Tabs II/P: the voices of Man.II play also on Pedal.
• Tabs II/I: the voices of Man.II play also on Man.I.
7. Automatic Pedal Registers, Voice Variation: By using the Automatic Pedal (A.P.) register,
the functions of the pedal board can be assigned to the 32 keys nearest the left of the first manual.
With the Voice variation (A/B) register you can change baroc or romantic voices selected.
20