Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4)
Wash the brush rollers as needed, using only water. Air-dry completely for at least 24 hours before reinstalling.
TROUBLESHOOTING
To reduce the risk of shock and unintended operation, turn off power and remove battery pack before servicing.
Problem
Not pick up debris
Brush roller not spin
Poor suction
Suddenly turns off on its
own
Appliance won't turn on
or charge
Short running time
The appliance power is
not stable
TECHNICAL DATA
Voltage: 25.9 V DC
Power: 220W
Adaptor input: 100-240V~ 50/60Hz
Adaptor Output: 31V DC, 0.5A
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 3 years guarantee, commencing from the day of sale. If you have a defective
product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by
third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction manual,
will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use if the instruction manual is not
properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case
Possible cause
Dust cup is full
Filters clogged or dirty
Filters are out of service
Brush roller clogged by hair, fibers, etc.
Filters clogged or dirty
Dust cup not installed correctly
Low battery
Nozzle or dirt passage clogged
Dust cup is full
Filters clogged or dirty
Overheat
Low battery
Overheat
Low power
Filters clogged or dirty
This is normal in the "auto-mode". The
suction
power
will
automatically during use
Possible solution
Empty the dust cup
Clean the filters
Change the worn filters
Clean the brush roller
Clean the filters
Reinstall the dust cup
Fully charge the battery
Disconnect nozzle to remove decries
Empty the dust cup
Clean the filters
Let appliance cool down and retry
Fully charge the battery
Let appliance cool down and retry
Fully charge the battery
Clean the filters
be
adjusted
- 19 -
Werbung
