Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. For short-reach cleaning, you can attach your desired attachment directly to the suction hole opening. Once
the click sound is heard, the nozzle is properly locked. (Fig. 5)
5. Press the power button to turn on the appliance. The appliance enters manual mode by default. The battery
pilot light will illuminate. Press power button again to turn off the appliance.
6. Mode selection: (Fig. 6)
1)
Manual mode: in manual mode you can press speed button (E) to adjust the speed (ECO speed, MID speed
or BOOST speed).
Lights D stand for speed:
1 of the lights D on: ECO speed; --- low power
3 of the lights D on: MID speed; --- mid power
All of the lights D on: BOOST speed. --- high power
2)
Auto mode: the appliance automatically adjusts speed and power by sensing different floor types to maximize
battery life. Auto mode light C will illuminate.
3)
How to switch from manual mode to auto mode: long press the speed button (E) for 2 seconds;
How to switch from auto mode to manual mode: short press the speed button (E) once.
NOTE: During use, please pay attention to the dust capacity and do not exceed the "MAX" level indicated on the
dust cup. This appliance is for dry suction only.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
(Fig. 5)
(Fig. 6)
- 17 -
(Fig. 4)
Werbung
