Herunterladen Diese Seite drucken

Sauber R20 Gebrauchsanleitung Seite 19

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CLEANING AND MAINTENANCE
1.
Before cleaning the product, turn off power and remove the battery pack.
2.
Do not immerse the main unit, battery pack, recharge seat, adapter and floor brushes in water or any other
liquids.
3.
Use only a soft dry cloth to clean the appliance.
4.
Do not use aggressive chemicals or abrasives.
5.
Do not use the device if the filter is broken or worn out.
6.
The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
7.
Store the appliance indoors. Ensure the appliance is at room temperature before operating.
1. How to empty the dust cup:
1)
To empty dust cup, first turn off power and disconnect all attachments.
2)
Press the dust cup release button. Pull up the dust cup to remove it from the main unit.
3)
Hold the dust cup over a bin.
4)
Unlock the dust cup buckle to open the dust cup lid. If necessary, tap the dust cup on the side or top to
remove excess dirt.
2. How to clean the dust cup filter:
1) First remove the dust cup from the main unit and empty it.
2) Remove HEPA filter, pre-filter and mesh filter in sequence, and wash them under running water. Then air dry
completely before placing them back in the dust cup. AIR DRY ONLY.
Note:
(1) Clean the dust cup filter every two weeks or so (depending on usage).
(2) To ensure peak performance of the appliance, if the HEPA filter cannot be well cleaned or the suction of the
appliance is decreasing, it is the time to replace the HEPA filter.
3. How to clean the brush rollers
1)
First turn off power and disconnect the floor brush from the appliance.
2)
Floor brush A: push the release switch (F) and twist the roller handle (G) at the same time to take the brush
roller out. Do the same for the brush roller in the other side. Clean off any dirt (hair and other fibers) tangled
around the roller.
3)
Floor brush B: push the lock (H) out to unlock the brush roller from the floor brush. Take it out and remove
any dirt (hair and other fibers) tangled around the roller.
- 18 -

Werbung

loading