Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BATTERY CHARGING:
1.
First, install the battery pack. Push the battery pack into the slot on the back of the main unit until it clicks
into place. (Fig. 1)
To remove the battery pack, pinch the release buttons on both sides of the battery pack and pull the battery
pack out of the main unit.
2.
Simply dock the appliance into the charging seat for re-charging (Fig.2). Plug the charging adapter into the
power socket.
3.
While charging, the pilot light will blinking; when the charging is finished, the pilot light will stay lit.
4.
After charging, unplug first, then you can take out the appliance for cleaning or let it rest on charging seat.
Note:
1.
Do not let the appliance uncharged for a long time, because the inner accumulators may be damaged.
2.
It takes approx. 4.5 hours to fully charge.
3.
The connector of the charging adapter is integrated in the charging seat. To use the adapter separately, use
a screwdriver to remove the screw and open the cover, then remove the connector from the charging seat.
(Fig. 3)
Fig. 2
Battery pilot light:
Recharge the appliance when the power level is lower than 25%.
OPERATION
1. Assemble the battery pack into the main body.
2. Insert the extension tube into the suction hole opening; make sure it fits firmly. Press the tube adjusting
button to adjust the length of the tube to suit your cleaning requirements.
3. Attach your desired attachment to the other side of the extension tube; make sure it fits firmly. (Fig. 4)
(Fig. 1)
Fig. 3
- 16 -
Werbung
